Floor Buffer for Tile and Grout Cleaning

Do you need to clean your grout and tile? Is it filmy, dirty, or stained? Think about using a floor buffer for tile and grout cleaning. Floor buffers allow you to quickly handle bigger areas of floor tile, and if used cautiously, you can even use a small floor buffer for walls.

Prior to buffing the floor, you are going to have to mop it with a Borax and ammonia solution for best results. Make sure that you mix the solution right. Soak the mop in the solution and scrub your soiled tile flooring. Make sure you rinse the mop and change the water often when it gets dirty.

Allow the solution to thoroughly dry on the floor surface, but for glossy tiles you may need to dry the tile yourself. Try the easy way, and use a clean terry rag under your foot. If this doesn't work, you will need a floor buffer.

If you use a floor buffer properly, you can clean up tile and grout in a short time without much effort.

You have no reason to purchase a floor buffer. If you want to clean grout, laminate, or tile, you can rent a floor buffer.

Most home jobs need a 15 inch diameter buffer, but you can also use a 17 inch floor buffer.

You can find a floor buffer at a home improvement or hardware store rental center. The majority of the time these buffers are rented for several hours, however you might have to reserve one ahead of time.

Make sure that you find out what comes with a buffer rental. To clean your home's floors, it ought to come with a pad that fits the buffer, along with abrasive pads for scrubbing that attach, as well as cleaning solvents.

Make sure that you get the instructions on how to use the floor buffer properly. You will have to practice with it a bit before you start, especially if you plan on going with the bigger one. You will need to know how to run the machine and how to install the pads.

For a tile and grout cleaner to be used with a floor buffer, combine 2 cups baking soda, 1 cup Borax starch, and a cup of heated water; continue to add water until it becomes thick in consistency. Use a soft brush to scrub the mixture on the tile and grout. Let the surface air dry after you rinse it.

It can't be argued that each type of flooring requires specific maintenance, and this is true in terms of waxing also.

The issue of using wax on floors always stirs some debate, and it really depends on the kind of flooring in question. Certain kinds of floors need consistent waxing to keep their luster, although wax destroys different flooring types.

Ceramic tiled flooring needs to be cleaned and waxed if it turns dark or yellow-tinged. This can result from wax accumulation, however ceramic tiling needs to be waxed if there is wear and tear evident, stubborn stains, or different damage.

Clean and apply sealant to your tile and grout before it is waxed. The majority of ceramic tiled floors require a single sealant coat, then a couple coatings of wax afterwards. Ordinarily these may be applied using a mop, after which the ceramic flooring needs to dry out thoroughly prior to use.


© 2013 HouseCleaningMastery.com Home | About Us | Contact Us | Privacy | Affiliates